Make sure that the screwdriver has a flat head. For this, you will require the screwdriver. However, you will not be able to remove the cartridge with your hands as it is tight. You can easily remove the nut with your hand. When it gets a little loose, you have to use your hands to spin it. Now, with the help of your pliers, you have to spin is and make it loosen. If you have insecurities that you will get confused eventually, don’t forget to take a picture of the position so that you don’t forget it. When you will install the new cartridge, you will need to install and position it in the same way the previous one was positioned. It is a very important step because if you don’t remember this, it will be tough for you to install the new one. Now, you have to look at this white piece of cartridge and remember the position of the cartridge. Before opening it, look carefully and see. Do not open it up without looking at it carefully. Now, before you move to it, you have to be careful. If you want to go for a Moen faucet repair bathroom sink, you already know that you have to deal with the cartridges! Once you have opened the handle of the faucet, you have to move your attention towards the cartridge. Once it is loose, you are free to use your hands to loosen it up more and open it. After spinning it for a little period, it will get loose. With the rubber wrench, you have to hold the handle and spin it anti-clockwise. And if you want it to be scratch-free, it is better for you to use a rubber wrench for opening it. While repairing it, you will never like to make scratches over it. Of course, the best Moen bathroom faucets are expensive and also it is your favorite. However, we recommend you using a rubber wrench. So, in this case, you can use pliers to open the handle. But according to us, it can be really tight for you to open it up. If you are planning to open it up with your hands, you can try. Now, you have to open up this handle into pieces so that you are able to stop the water leakage.įor this work, you will need a rubber wrench. So you already know which side of the faucet is causing the leaking. Here, opening the faucet refers to opening the handle. You can just switch off the only main lever you have and you are done! If you are going to do Moen bathroom faucet repair one handle, you will not need to check both levers. On the other hand, if you don’t find any switch under the sink, you will need to switch off the main water lever of the house. If there is only one switch, the choice is easier. The switch that will stop the water leakage will be the one that you need to repair now. If there are none, you have to switch the other one-off. First of all, turn the switch of hot water and after 1-1.5 minutes, check if there is any water leaking or not. There can also so one switch for both of them. There might be different switches for the hot water and the cold water. The main switch is basically situated under the sink.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |